- Deep Groove Ball Bearings[10]
- Thrust Roller Bearings[7]
- Angular Contact Ball Bearings[10]
- Taper Roller Bearings[10]
- Cylindrical Roller Bearings[10]
- Pillow Block Bearings[10]
- Special Bearings[2]
- Thrust Ball Bearings[10]
- Self-aligning Ball Bearings[10]
- Spherical Roller Bearings[10]
- Linear Bearings[1]
- Other Roller Bearings[1]
- Needle Bearings[7]
- Rod End Bearings[10]
- Contact Person : Mr. Zhang Huatao
- Company Name : Guangzhou Xinbeilin Bearing Co., Ltd.
- Tel : 0086-20-86334567
- Fax : 0086-20-36331102
- Address : Guangdong,Guangzhou,515 No.799,Jinlai Building,Sanyuanli Road,Baiyun District,Guangzhou,Guangdong,China
- Country/Region : China
- Zip : 510403
pillow block bearing skf UCP203 17*27.4*11.5MM high quality have stock
pillow block bearing skf UCP203 17*27.4*11.5MM high quality have stock
www.gzxblbearing.en.alibaba.com
www.hk-bearing.com
SKF pillow block bearing
Pillow Block Bearing is a mounted bearing which is used to provide load support for a rotating shaft with the mounting surface on a parallet line with the axis of the shaft.The selection of the appropiate bearings can be completed based on the shaft size and the requirement of radial and thrust load.Elongated bolt holes in the base or feet of the unit allow for some adjustment and it is easy to mount the pillow block bearing.
Whether original to the equipment or as a replacement or not will be the key in selecting the right pillow block with dimensions and measurments of pillow block bearings.The shaft diameter is matched with the approciate corresponding bore dimensions of the bearing unit.If a properly sized unit matching the shaft is selected, the bearing will easily slide onto the shaft and into position and ready to be secured by the locking device.Shaft height also be called backing height is determined by measuring the distance from the base (or bottom) of the pillow block to the center of the ring or shaft.At last, the distance between the bolt hole centers is taken from the center of one elongated bolt hole to the center of the other bolt hole of housing.Construction:Pillow Block Bearing Unit are comprosed of insert bearing installed in special housing.The spherical fit of the outside diameter of the insert bearing and the inside diameter of the housing accomodates misalignments.Material:cast iron,pressed steel, chrom steel , carbon steel,stai GCr15,and so on.Quality Certification:ISO9001:2000 system.Service:OEM serviceAdvantage:High quality and competitive priceMounting :
The method of mounting rolling bearings strongly affects their accuracy,life,and performance,so their mounting deserves careful attention.It is recommended that the handling procedures for bearing be fully investigated by the design engineers and that standards be established with respect to the following items:
1,Clearing the bearings and related parts.
2,Checking the dimensions and finishing of related parts.
3,Mounting procedures.
4Inspection after mounting.
5,Supply of lubricants.
pillow block bearing skf UCP203 17*27.4*11.5MM high quality have stock
